PEERLESS™
The First Step in Prespotting in GreenEarth
If you use Gr
eenEarth,
you know that prespotting can be challenging without the proper chemicals.
Chemicals made for use in perc or hydrocarbon can cause ringing, but PEERLESS™
is designed exclusively for use in GreenEarth Solvent.
PEERLESS™ is designed to aid GreenEarth Solvent in removing both
dryside and wetside soil. The unique formula will remove numerous types
of greases and oils, as well as wetside soils so you don’t need
to use a lot of different chemicals.
PEERLESS™ was designed to completely flush out in GreenEarth solvent
so you won’t get rings. When you apply PEERLESS™ it will immediately
begin to penetrate and suspend the soil so that both the soil and PEERLESS™
will be removed from the garments during the cleaning cycle. This prevents
rings from developing and redeposition of the soil.
PEERLESS™ was designed to be thrown into the cleaning machine “wet”. You can put PEERLESS™ on a garment and throw it right into the cleaning machine soaking wet. You do not have to dry the garment or flush the PEERLESS™ out prior to cleaning.
PEERLESS™ will help to prevent other wetside chemicals from leaving rings on garments. After drying the garment, apply PEERLESS™ and in most cases this will prevent any ringing.
Directions For Using PEERLESS™
- Apply PEERLESS™ full strength onto a stain or soil prior to cleaning. PEERLESS™ can either poured or sprayed. Brush PEERLESS™ into the soil, and throw the garment into the machine wet.
- If the soil or stain remains after cleaning, you may need to work on it using normal stain removal techniques.
- After you remove the stain, dry the garment, reapply PEERLESS™ and reclean the garment. This should prevent any rings from appearing.